BWTZR - 841 STAINLESS STEEL POLISH & CLNR
- MSDS: BWTZR
- Manufacturer: CLAIRE MFG CO
- Product Name: 841 STAINLESS STEEL POLISH & CLNR
- National Stock Number: 7930-00F038453
Product Identification
Product ID:841 STAINLESS STEEL POLISH & CLNR
MSDS Date:02/15/1990
FSC:7930
NIIN:00F038453
MSDS Number: BWTZR
Responsible Party
ADDISON, IL 60101-4423
US
Emergency Phone: 800-228-5635/708-543-7600
Info Phone: 708-543-7600/800-228-5635
Preparer: T O VYFHUIS
Cage: GO155
Contractor
Telephone: (312) 543-7600
Cage: GO155
Ingredients
NAPHTHA PETROLEUM, HEAVY ALKYLATE C9-C12 BOILING PT
CAS: 64741-65-7
Fraction By Weight: 25-30%
ACGIH TLV: 100 PPM
METHYL CHLOROFORM (1,1,1-TRICHLOROETHANE) (CHLOROTHENE NU),
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 46.8%
OSHA PEL 350 PPM
ACGIH TLV: 1910 MG/CUM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WHITE MINERAL OIL
CAS: 8042-47-5
RTECS: PY8047000
Fraction By Weight: 15-20%
OSHA PEL 5 MG/CUM MIST
ACGIH TLV: 5 MG/CUM MIST
ISOBUTANE/PROPANE PROPELLANT *94-4*
CAS: 68474-85-7
Fraction By Weight: 10%
ACGIH TLV: 1000 PPM
Hazards
LD50 LC50 Mixture:ORAL LD50(RAT): 10.3 G/KG (SEE SUPP)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: THROAT IRRITATION. SKIN:
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, DROWSINESS, DEFATTING
Medical Cond Aggravated by Exposure:LIVER DISEASE & RHYTHM DISORDERS OF
THE HEART.
First Aid
First Aid:INHALATION: MOVE TO SOURCE OF FRESH AIR. EYES: FLUSH
IMMEDIATELY W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER. OBTAIN
MEDICAL ATTENTION IN ALL CASES. NOTE TO PHYSICIAN: ADRENALIN SHOULD
NEVER BE GIV EN TO PERSONS OVEREXPOSED 1,1,1 TRICHLORETHANE.
Fire Fighting
Flash Point:125-130F
Lower Limits:2.1
Upper Limits:9.5
Extinguishing Media:DRY CHEMICAL, CO2, FOAM
Fire Fighting Procedures:CONTAINERS SHOULD BE COOLED W/WATER TO PREVENT
VAPOR PRESSURE BUILDUP. USE EQUIPMENT/SHIELDING TO PROTECT FROM
BURSTING, RUPTURING/VENTING CONTAINERS.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPS >130F, CONTAINERS MAY
VENT, RUPTURE/BURST.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES & VENTILATE AREA.
SOAK UP W/AN INERT ABSORBENT & PLACE INTO A DESIGNATED DISPOSAL
CONTAINER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT & FLAME. USE
W/ADEQUATE VENTILATION. DON'T PUNCTURE/INCINERATE CONTAINERS.
DROPPING CONTAINERS MAY CAUSE BURSTING.
Other Precautions:AVOID BREATHING VAPOR. READ & FOLLOW DIRECTIONS ON
PRODUCT LABEL, GIVEN ARE THE NECESSARY SAFETY PRECAUTIONS TO USING
THIS PRODUCT & TO PROTECT YOUR HEALTH.
Exposure Controls
Respiratory Protection:NONE REQUIRED W/GOOD VENTILATION. IF EXPOSURE
MAY EXCEED EXPOSURE LIMITS, USE A NIOSH APPROVED RESPIRATOR TO
PREVENT OVEREXPOSURE.
Ventilation:LOCAL EXHAUST/MECHANICAL (GENERAL)
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:CHEMICAL SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
LD50 INFORMATION IS FOR: 1,1,1 TRICHLOROETHANE. ENSURE STRICT SANITARY
CONDITIONS ARE CONFORMED TO WHEN WORKING AROUND CHEMICALS.
Chemical Properties
Vapor Pres:120 PSIG
Vapor Density:>1
Spec Gravity:<1
Evaporation Rate & Reference:(ETHER=1): <1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE MIST SPRAY W/LEMON ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIS, OXIDIZERS, REACTIVE METALS
Stability Condition to Avoid:HEAT, OPEN FLAMES, SPARKS, ELEVATED TEMPS
>130F & OTHER IGNITION SOURCES
Hazardous Decomposition Products:HYDROGEN CHLORIDE, PHOSGENE, CO2, CO,
ADDITIONAL TOXIC CHEMICALS MAY BE FORMED IN SMALL AMOUNTS.
Disposal
Waste Disposal Methods:DON'T PUNCTURE/INCINERATE CONTAINERS. WHEN
CONTENTS ARE DEPLETED, CONTINUE TO DEPRESS BUTTON UNTIL ALL GAS IS
EXPELLED. DISPOSE OF CONTAINER IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. UN1950.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.